Get on target fast with the SPARC II. Ultra-compact and lightweight, the SPARC II (Speed Point Aiming for Rapid Combat) is equally at home mounted on a rifle or shotgun. Digital rear facing controls for powering on/off and adjusting the 2 MOA daylight bright red dot brightness at ten intensity levels—automatically returning to the last dot intensity used when powered up. Rugged single-piece body machined from aircraft grade aluminum is o-ring sealed for waterproof and fogproof performance. The VMX-3T Magnifier is not recommended for use with the SPARC II.
Product Overview
Sparc II Red Dot (SPC-402)
Get on target fast with the Sparc II. Ultra-compact and lightweight, the Sparc II (Speed Point Aiming for Rapid Combat) is equally at home mounted on a rifle or shotgun. Digital rear facing controls for powering on/off and adjusting the 2 MOA daylight bright red dot brightness at ten intensity levels-automatically returning to the last dot intensity used when powered up. Rugged single-piece body machined from aircraft grade aluminum is o-ring sealed for waterproof and fogproof performance. The VMX-3T Magnifier is Not recommended for use with the Sparc II.
The versatile multi-height mount system accommodates most firearms including rifles needing absolute or lower 1/3 co-witness heights, and mounts on standard Weaver or Picatinny bases (not included). A modular three-piece base offers four separate mounting heights for user- and weapon-specific customization: 18.0 mm (.709 inches), 21 mm (.823 inches), 37 mm (1.457 inches), 40 mm (1.575 inches).
Includes:
Multi-height Mount System, T-10 Torx Wrench, 7/64" Hex Wrench, CR 2032 Battery, Flip Cap Optics Covers
Specs
- Magnification: 1x
- Objective Lens Diameter: 22 mm
- Eye Relief: Unlimited
- Adjustment Graduation: 1 MOA
- Travel per Rotation:45 MOA
- Max Elevation Adjustment: 90 MOA
- Max Windage Adjustment: 90 MOA
- Parallax Setting: Parallax Free
Daylight Bright Red Dot Reticle
The daylight bright 2 MOA dot is fast and easy to use. Choose among ten variable illumination settings-the lowest two settings are night-vision compatible.
The key thing to remember when shooting with the Sparc II red dot is to keep both of your eyes open! Shooting with both eyes open allows you to take full advantage of your peripheral vision to get on target very quickly. Eye placement is not critical. As long as you can see the dot, you’ll hit your target!
Windage and Elevation Adjustments
The Sparc II red dot incorporates elevation and windage dials with audible clicks. Each small click will move the point-of-impact one Minute of Angle (MOA). 1 MOA will closely correspond to one inch at 100 yards, 1/2 inch at 50 yards, 1/4 inch at 25 yards, etc.
1. Remove the dial covers.
2. Use the raised bars on the dial covers, coin or screw driver to make the adjustments.
3. Turn the adjustment dial in the appropriate direction as indicated by the arrows. Move the dials in the direction you wish the bullet’s point-of-impact to change.
Mounting the SPARC II
The Sparc II can be mounted on a variety of platforms using various combinations of the high mount, low mount and spacer. To get the best results from your Sparc II red dot, proper mounting is essential and, although not difficult, the correct steps must be followed. Your firearm will need to be equipped with a Picatinny or Weaver style rail/base.
1. Attach the Sparc II to the rail/base with the adjustment control buttons facing the shooter and make sure the mount is solidly seated in the base groove. In order to prevent recoil injury, position the Sparc III so you have at least four inches of eye relief.
2. Be sure the base clamp is hooked around the outside of the rail/ base.
3. Press the Sparc II downward and forward toward the muzzle. Then, firmly tighten the base clamp bolt using the hex wrench.
- Make sure this fits
by entering your model number.
- The highly compact, daylight bright Sparc II is packed with performance features and lends itself to a variety of platforms.
- A modular three piece base offers four seperate mounting heights for user and weapon specific customization. A high base and shim plate offer absolute and lower 1/3 co-witness mounting heights. A low base provides options for handguns or shotguns.
- Fully multi-coated lenses offer a clear field of view and the unit is parallax free with unlimited eye relief. Elevation and windage turrets adjust the point of impact up and down or left and right.
- Machined from aircraft-grade aluminum, the one piece body is rugged and lightweight providing shockproof performance withstanding recoil and impact. O-ring seals and nitrogen purging ensure the unit is water and fogproof in the field.
- Rear facing power controls with only two buttons offer simplicity in use and adjustment of the 10 brightness levels available.
.png){kind=logo}
